Timberlife Satinwood 28 Base

SATINWOOD 28/28 Base is a solvent-based finish that contains penetrating water repellent oil and wax components to nourish and protect wood against the elements when exposed to exterior conditions. SATINWOOD 28/28 Base contains a fungicidal additive that provides added surface protection to wood against mould growth and fungal discolouration. It also contains an additional insecticide to provide surface protection against wood borer and termite attack. SATINWOOD 28/28 Base enhances the natural beauty of the wood and dries to a satin-like, translucent finish that does not flake or peel. Most suitable for applications such as wooden decks, doors, window frames, cladding, log homes, outdoor furniture etc.

Can be tinted to shades of brown: Mahogany, Oregon, Teak, Oak, Dark Oak, Golden Brown and Walnut (Only use Timberlife SOLV-TINTS that contain high quality, colour fast transparent iron oxide pigments)

Satinwood 28 is recommended for Softwoods and Hardwoods of high porosity.

Satinwood 28 Base is recommended for Hardwoods of low porosity.

Active Ingredients:     
Drying oils, Waxes and Fungicide plus Insecticide

Physical Characteristics:     
Appearance     -     Transparent amber colour
Solubility     -     Solvent borne
Density @ 20°C     -     ± 0,82 - 0,87 kg/

Use Restriction:     
Not to be used on previously coated timber surfaces. Remove old coatings and sand surface before application.

Application:     
Brush, spray or dip. Mix contents before use. Apply a second coat 24 hours after applying the first coat. Apply a third coat if necessary. Wipe any excess product from the surface.

Application Rate:     
5m2 - 10m2per per coat (depending on the timber type).

Dilution Rates:     
Ready for use

Storage:     
Storage temperatures should not exceed 40°C. Keep container sealed.

Packaging:     
1, 5, 20, 25 and 200 containers.

Caution:     Flammable. Avoid open flames. Avoid eye splashes and prolonged skin contact.